How to Clean Igloo Ice Maker Without Any Special Equipment
how to clean igloo ice maker

In this article, you’ll find out how to clean Igloo ice maker from within the machine. When you empty your ice maker’s bin and refill it with water, you should rinse it with fresh water. This will help remove any wastes or debris that might have been left behind on the inside of the machine!

The Components of an Ice Maker

inside an icemaker machine

An ice maker is a machine that creates ice cubes from water. There are many different types of ice makers, but all of them share certain common components. 

The most important part of an ice maker is the water tank, which holds the water and delivers it to the ice maker’s freezing chamber. The freezing chamber contains a number of blades that chop the water into small pieces, which causes it to freeze.

The other components of an ice maker include the control panel, motor, and cooling fan. The control panel allows you to set the temperature and time for the machine to produce ice cubes. The motor drives the blades in the freezing chamber, and the cooling fan helps keep the chamber cool.

What to Use When Cleaning an Igloo Ice Maker

Cleaning an ice maker is not as difficult as it may seem. There are a few simple steps you can take to ensure that your machine keeps running smoothly:

  1. Use a mild household cleaner to clean the machine’s exterior.
  2. To clean the machine’s crevices and surfaces, use a degreaser.
  3. Clean the entire machine with dishwashing soap.

First, use a mild household cleaner to clean the machine’s exterior. Make sure to rinse the cleaner off before using it on the next piece of equipment. 

Next, use a degreaser to clean the machine’s crevices and surfaces. Wear gloves while cleaning to avoid staining your hands or nails with chemicals. 

Finally, use dishwashing soap to clean the entire machine. Again, make sure to rinse off all the soap before putting the device back in service.

Things to Remember When Cleaning an Igloo Ice Maker

Lately, Igloo ice makers have become quite popular among homeowners, as they’re straightforward to operate and maintain. However, like any other appliance, Igloo ice makers can accumulate dust and debris over time, leading to poor ice production and overall cleanliness. 

Before starting your cleaning ritual, it’s essential to familiarize yourself with the different parts of an Igloo ice maker and the best way to clean them. Here are a few tips to help you get started:

  1. Remove all food particles from the interior of the Igloo bin with a vacuum cleaner before cleaning.
  2. Clean the condenser and evaporator coils on the underside of the Igloo unit with a damp cloth. Make sure to get all the dust and debris off them. Finally, use a dry cloth to polish the surfaces until they’re shiny.
  3. Clean the exterior of the Igloo unit with a soft cloth or sponge. Make sure to clean any dirt and debris. Use a spray cleaner to remove any lingering marks or scuffs.
  4. Rinse all components thoroughly with warm water and dry them completely before storage or use.

How to Know if an Igloo Ice Maker Needs to Be Cleaned

icemaker machine

Before we go through our guide on how to clean Igloo ice maker, it’s important to know any signs that indicate your ice maker needs cleaning. If you’ve been using your Igloo ice maker for an extended period and notice the ice appears cloudy or dirty, it may be time to clean it. This is especially important if the Igloo ice maker hasn’t been used in a while and is stored in a cool, dry place. Another indication is your ice maker starts showing signs for cleaning.

How to Clean Igloo Ice Maker

To clean your Igloo ice maker, follow these simple steps: 

  1. Remove all the ice from the machine. 
  2. Pour a pot of hot water into the Igloo freezer, filling it halfway. 
  3. Place the Igloo ice machine into the hot water, and let it soak for 10 minutes. 
  4. Remove the Igloo ice machine from the hot water and place it on a clean surface. 
  5. Use a dish scrubber to wash the parts of the Igloo ice machine with hot, soapy water. 
  6. Rinse the Igloo ice machine with cold water to remove any soap residue. 
  7. Allow the Igloo ice machine to dry before re-installing it into your refrigerator or freezer.

In-Depth Understanding: The Cleaning Procedure of an Igloo Ice Maker

Disable the Ice Maker

First, disable the ice maker. This can be done by simply turning off the breaker box that controls it, or unplugging the ice maker from the wall. If the ice maker is frozen in place, use a pry bar or screwdriver to remove it from the wall. Once it’s been disabled, it can be cleaned as usual.

Pour Some Soap and Water into the Machine

The next step is to fill up a bucket with warm water and dish soap and pour it into the machine. Mix the soap and water well before pouring them into the machine to cover all the parts. Next, turn on the device and wait until all the soap and water have been sucked inside. If the foam is still not coming out, it may be necessary to disassemble the machine.

Remove the Foam

After the soap and water have been poured into the machine, there should be a lot of foam that comes out of it. Remove each screw on top of each module with a screwdriver until they’re all removed: the entire unit can be detached from your wall so you can clean it more easily.

Clean

Once you’ve disassembled your ice maker, place each part in your dishwasher or under running water to clean it. Next, take a small brush and brush the inside of each piece, making sure not to get any water on it. You can also use a toothbrush if needed. 

Find where all the screws, wires, and tubes go so you can clean them up. Once everything is clean, reassemble your ice maker by putting the screws back in place.

How to Disassemble and Reassemble the Parts

If you have an Igloo ice maker, it’s time to clean it. This guide will show you how to disassemble and reassemble the parts so your ice maker can be cleaned properly.

To start, unscrew the base of the Igloo ice maker. You’ll see four screws that hold the bottom in place. Once the screws are removed, lift the bottom and set it aside.

Next, take off the top panel of the Igloo ice maker. Two screws at the top of the board must be unscrewed before removing them. Once these screws are removed, lift the top panel and set it aside.

Now that the top panel is off, you can see the inside parts of the Igloo ice maker. The first thing you want to do is remove all of the filter cartridges. These can be found on either side of the filter housing, and should be unscrewed with a Phillips head screwdriver. After they are unscrewed, throw them away, or recycle them if possible.

Next, remove all the water filters located below each water line on each side of the Igloo ice maker. This may take a little time and effort, as each water line is covered by screws that need to be removed. 

After all the water filters are removed, throw them away or recycle them. Now, get ready to tackle the next step, drawing the water inlet tube. To remove the water inlet tube, you’ll need to use a pair of pliers (or something similar) and grasp one end firmly with the pliers while using your other hand to twist it clockwise.

Once you have accomplished this, pull it straight out from the bottom of the Igloo ice maker and set it aside. Once the water tubes are removed, you can see how everything is connected.

Frequently Asked Questions

1. Is it necessary to clean an Igloo ice maker?

Yes, it’s important to clean the Igloo ice maker on a regular basis in order to maintain optimal performance. The ice maker may become clogged with food and other debris, which will affect the performance of the unit. Additionally, dirty ice can lead to improper cooling of your food.

2. How do you clean an Igloo ice maker?

There are a few different ways you can clean an Igloo ice maker: either use a water and vinegar mixture, or use a dishwasher. Follow the instructions that come with your machine for the best results.

3. What should I do if cleaning the Igloo ice maker doesn’t work?

If cleaning the Igloo ice maker doesn’t work, you may need to take it apart and clean it manually. Be sure to use caution when doing this, as there are many parts that can be easily damaged.

Conclusion

Igloo ice makers are a great way to keep food and drink cold. However, like any other appliance, they can get dirty over time. In this blog post, we taught you how to clean Igloo ice maker so that it’s in optimal working condition. By following these simple steps, you should be able to have your Igloo ice maker performing at its best!

Related Posts

how many people know the coca cola recipe

How Many People Know The Coca-Cola Recipe?

Coca-Cola is, allegedly, the largest non-alcoholic beverage company in the world. But, that’s not the only thing that’s alleged of them. Curious to know how many people know the Coca-Cola recipe? Read on to find the answer, uncover whether the legend stands true, and explore the story behind it.

how to set a table for dinner party

How to Set a Table For a Dinner Party – The Ultimate Guide

Hosting and entertaining is a special art and tablescapes are its most important asset. Sure, in such a fast-paced world, it does seem ridiculous to dress up a table. But, in this guide, we explain why it’s important, explain how to set a table for a dinner party, and provide styles you can follow.

Subscribe To Our Weekly Newsletter

Get notified about new articles